Free Practice Exams & Studyguides By NetworkCerts!!

	Sign In Sign-Up

Advertising Inquiries CLICK HERE

Featured Site

NetworkCerts.com Routing Practice Test 14 For Cisco's CCNP/CCDP Certification
Answer Key

1. What command would you use to set a static route to network 172.16.12.0 (default subnet) going through IP address 172.16.11.12?
ip route 172.16.12.0 255.255.255.0 172.16.11.12
2. What command would you use to enable igrp for autonomous system 10?
router igrp 10
3. What command would assign access-list 101 for inbound traffic on an interface (assume you are in interface config mode already)?
ip access-group 101 in
4. What is the command to enable ppp encaspsulation?
encapsulation ppp
5. What command will cause your router to cycle?
reload
6. Which command would you use to view the contents of NVRAM?
show startup-config
7. Type in the command to set the name of your router to RouterA.
hostname routerA
8. Type in the command to set the enable password to ciscorouter.
enable password ciscorouter
9. Type in the command to create subinterface s2.1.
interface s2.1
10. What is the command to set 123456789 as the SPID number for ISDN SPID1?
isdn spid1 123456789

Featured Book

"Cisco" the "Cisco Logo", "CCNA," "CCNP," "CCDP," "CCDA," "CCIE,"
"Cisco Certified Network Associate," "Cisco Certified Design Professional," "Cisco Certified Design Associate," and "Cisco Certified Network Professional," are registered trademarks of Cisco Systems Inc. This site and the contents contained herein, is not associated with or endorsed by Cisco Systems, Inc.