Free Practice Exams & Studyguides By NetworkCerts!!

	Sign In Sign-Up

Advertising Inquiries CLICK HERE

Featured Site

NetworkCerts.com Routing Exam Prep 14 For Cisco CCNP/CCDP Certification

NetworkCerts.com Routing Exam Prep 14 For Cisco CCNP/CCDP Certification

In this test you will need to type in the exact answer for each question. Do not use abbreviated commands. Assume that you are already in the correct configuration modes. Hit the "finished" button when finished to see your score.

1. What command would you use to set a static route to network 172.16.12.0 (default subnet) going through IP address 172.16.11.12?

2. What command would you use to enable igrp for autonomous system 10?

3. What command would assign access-list 101 for inbound traffic on an interface (assume you are in interface config mode already)?

4. What is the command to enable ppp encaspsulation?

5. What command will cause your router to cycle?

6. Which command would you use to view the contents of NVRAM?

7. Type in the command to set the name of your router to RouterA.

8. Type in the command to set the enable password to ciscorouter.

9. Type in the command to create subinterface s2.1.

10. What is the command to set 123456789 as the SPID number for ISDN SPID1?


Created with ArgoSphere's Test Maker - www.argosphere.net

Answer Key

Featured Book

"Cisco" the "Cisco Logo", "CCNA," "CCNP," "CCDP," "CCDA," "CCIE,"
"Cisco Certified Network Associate," "Cisco Certified Design Professional," "Cisco Certified Design Associate," and "Cisco Certified Network Professional," are registered trademarks of Cisco Systems Inc. This site and the contents contained herein, is not associated with or endorsed by Cisco Systems, Inc.